Items:, Value:

Design Idea : Galactic Earrings

Kits & Design Ideas > Design Idea : Galactic Earrings

Galactic Earrings : Instructions

Take one head pin and thread on a galactic bead. Holding the bead at the bottom of the pin, grip the pin close to the bead with flat or chain or round nosed pliers and bend it over by 90 degrees.

Trim the pin to leave about 0.8mm, with wire cutters. Grip the end of the pin with round nosed pliers and roll it over into a loop.

Take another head pin and trim off the "head". Form a loop at one end, by bending over 0.8mm 90 degrees, and rolling the loop as before. Before fully closing the loop, insert the loop of the link you have just made.

Thread on a 6mm round, a 6mm cheerio and a 4mm bicone. Form a loop as above.

Trim the head off another headpin and form a loop in one end as before. Before fully closing the loop, insert the loop of the previous link.

Thread on a 4mm round and a 4mm bicone. Form a loop as above, but before fully closing, insert the loop on one of the fishhook ear wires.

Repeat the whole process to make the second earring.